gsmbxu@ powered by .:DR.APE:.

Your access is limited to certain areas of the board unless you login.By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features.
Registration is fast, simple and absolutely free so please, join our community today!

Join the forum, it's quick and easy

gsmbxu@ powered by .:DR.APE:.

Your access is limited to certain areas of the board unless you login.By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features.
Registration is fast, simple and absolutely free so please, join our community today!

gsmbxu@ powered by .:DR.APE:.

Would you like to react to this message? Create an account in a few clicks or log in to continue.

    :.Universal-SIM for iPhone 3G V620.::

    rejeev9977
    rejeev9977
    rejeev9977
    Moderator
    Moderator


    Posts : 37
    Join date : 2009-05-22
    Age : 46
    Location : Kerala,(NOW IN GUJARAT)INDIA
    • Post n°1

    :.Universal-SIM for iPhone 3G V620.:: Empty :.Universal-SIM for iPhone 3G V620.::

    Post by rejeev9977 06.06.09 3:37

    Universal-SIM for iPhone 3G V620
    :.Universal-SIM for iPhone 3G V620.:: 309kft4
    What’s new in V620 for iPhone 3G
    - specal designed to work on iPhone 3G v2.2.1
    - tested on modem v2.30.3
    - changed iPhone unlocking method
    - recommended setting: Use card ATR / Use standard baudrate (~10k)
    - unlock time - around 5 minutes depending on simcard

    Tips for Universal-SIM iPhone 3G v2.2.1 software users:
    1. Reboot the mobile phone after each unsuccessfull try.
    2. Wait until phone displays “No SIM card installed” or similar message
    in other languages then you can insert your simcard together with
    Universal-SIM. Do no insert universal-SIM before iPhone 3G software had
    finished loading.
    3. After you insert the simcard phone must display
    00:00 - “No Service” -> (after about 20 seconds) 00:20 -”Searching…”
    -> 01:00 “No SIM card installed” -> 01:30 wait and get signal
    -> 02:40 -> “Searching…” -> 03:40 - You can use the phone!

    The times are approximative and will depend on the speed of the simcard
    and settings used ( please use normal 10k baudrate ( not higher )!

    Thank you for using Universal-SIM,

    Razz
    • Back to top
      Current date/time is 02.05.24 1:53